|
THE MOST SUITABLE IN ITS CLASS It is the most suitable water-based glass polish material in its class. Its performance in application and quality is very high. |
|
THE MOST PRACTICAL WATER-BASED GLASS POLISH Compared to solvent-based other polish products, being water-based especially extends the life of wood. |
|
DOES NOT REQUIRE SPECIALIZED KNOWLEDGE It is designed for anyone to easily apply by themselves. The person applying does not need to be familiar with the subject or be an expert. It can be easily applied directly with a brush or roller on the surface. |
|
BREATHABILITY Being water-based, it has breathability. This ensures the longevity and durability of wood, especially on wooden surfaces. |
EN İYİ SONUÇLAR İÇİN
ETKİLİ ÇÖZÜMLER
SORUNLARDAN KAÇINMAK İÇİN
- Breathability Feature
- Transparent after drying
- Water Based Structure
- Lead Free
- Solvent Free
- Can be used on interior / exterior surfaces
- Excellent adhesion property
- Water-Based Structure
- Penetration feature
- Low VOC
|
Izogin varnish is a water-based transparent wood floor and parquet glass polish. Izogin varnish has been subjected to UV resistance testing in a TÜRKAK accredited test laboratory, and the test results showed no bubbling, peeling, or cracking. Being water-based, it penetrates deep into the wood surface and provides surface protection. Due to its water-based nature, it allows the wood to breathe, preventing mold and decay. It is unaffected by seeping and can be washed with water. It is wipeable and resistant to impacts that would not damage the wood. Being water-based, it does not release harmful odors in closed environments. New wood surfaces: Smooth planed wood surfaces are colored with the help of water-based pigments. If used in its natural state, this step is not necessary. If the wood surface is to be protected against bacteria, Izogin Preventin should be used. Izogin Preventin is colored and applied with a brush or roller. If the wood is to be protected against ignition or flame, Izogin Fermo should be used. If Izogin Fermo is used, there is no need to use Izogin Preventin. After the protection and optional coloring process, the wood surface should dry for 24 hours. After drying, apply one coat (primer) of Izogin varnish with a brush or roller. After 12 hours, apply the second coat of Izogin glass polish. For old wood surfaces: Sand off any paint, varnish, or coating materials on the old wood surface until completely clean. After this cleaning, the same process as for new wood surfaces should be followed. CONSUMPTION Depending on the type of wood (hardness and softness), the primer layer requires 100 gr/m2 to 120 gr/m2, and for the last two coats, each layer requires 80 to 100 gr/m2. |